Panasonic DMC-F2 - Manual (Page 52)

Advanced-Shooting
-  -
Taking Pictures that Match the Scene being
Recorded
(Scene Mode)
Recording Mode: 5
When you select a Scene Mode to match the subject and recording situation, the camera sets
the optimal exposure and hue to obtain the desired picture.
1 Slide the recording/playback switch to [1].
2 Press [MODE] to display the mode selection
screen.
3 Press e/r to select [SCENE MODE] and then
press [MENU/SET].
4 Press e/r/w/q to select the Scene Mode.
• You can switch menu screens by the page from any menu item
by rotating the zoom lever.
5 Press [MENU/SET] to set.
• The menu screen is switched to the recording screen in the selected Scene Mode.
• Depending on the scene mode, the setting screen appears.
Scene mode help [6 INFORMATION]
• To see explanations about the scene modes, press [DISPLAY] while a
Scene Mode is selected in step 4. Press again to return to the Scene
Mode menu.
Note
• To change the Scene Mode, press [MENU/SET] and q, and then perform steps 4 and 5 above.
• Refer to P 48 for the shutter speed.
• The flash settings return to the initial settings when you change the Scene Mode.
• The color of the picture may seem strange if you use a scene mode that is unsuitable for the
shot.
• The following cannot be set in Scene Mode.
– [SENSITIVITY]/[COLOR MODE]
