Panasonic DMC-F2 - Manual (Page 18)

Preparation
- 1 -
Setting Date/Time
(Clock Set)
• The clock is not set when the camera is shipped.
A
B
ON OFF
1 Turn the camera on.
A
[MENU/SET] button
B
Cursor buttons
• (When the language select screen is not displayed
" step 4)
2 Press [MENU/SET].
3 Press e/r to select the language, and
press [MENU/SET].
• The [PLEASE SET THE CLOCK] message
appears. (This message does not appear in
Playback Mode.)
4 Press [MENU/SET].
5 Press w/q to select the items (year, month, day, hour, minute, display
sequence or time display format), and press e/r to set.
C q
D w
C
Time at the home area
D
Time at the travel destination (P 68 )
4: Cancel without setting the clock.
• Select either [24HRS] or [AM/PM] for the
time display format.
• AM/PM is displayed when [AM/PM] is
selected.
6 Press [MENU/SET].
• After completing the clock settings, turn the camera off. Then turn the camera
back on, switch to Recording Mode, and check that the display reflects the
settings that were performed.
• When [MENU/SET] has been pressed to complete the settings without the clock
having been set, set the clock correctly by following the “Changing the clock
setting” procedure (P 19 ).