Panasonic SC-HT995W - Manual (Page 29)

R
Q
T
876
6
29
Cha
nging
the
pla
y
er s
e
ttin
g
s
∫ “Video” tab
∫ “Audio” tab
§5 Refer to “Frame still and field still” ( ➜ page 43, Glossary).
§6 [Southeast\Asia]and]Thailand]
§7 [The\Middle\East,\South]Africa,]Saudi[Arabia,[Kuwait,[Australia[and[N.Z.[
(Continued on next page)
QUICK SETUP enables successive settings of the items in the shaded area.
TV Aspect
Choose the setting to suit your
television and preference.
≥ 4:3 Pan&Scan: Regular aspect television (4:3)
The sides of the widescreen picture are cut off so it fills the screen (unless
prohibited by the disc).
≥ 4:3 Letterbox: Regular aspect television (4:3)
Widescreen picture is shown in the letterbox style.
≥ 16:9: Widescreen television (16:9)
TV Type
Select to suit the type of television.
≥ Standard (Direct View TV) ≥ CRT Projector ≥ LCD TV/Projector
≥ Projection TV ≥ Plasma TV
Time Delay
When connected with a Plasma
display, adjust if you notice the audio is
out of sync with the video.
≥ 0ms ≥ 20ms ≥ 40ms ≥ 60ms ≥ 80ms ≥ 100ms
Still Mode
Specify the type of picture shown
when paused.
≥ Automatic
≥ Field
§5 : The picture is not blurred, but picture quality is lower.
≥ Frame §5 : Overall quality is high, but the picture may appear blurred.
NTSC Disc Output
Choose PAL 60 or NTSC output when
playing NTSC discs (
➜ page 17,
Video systems).
≥ PAL60: When connected to a PAL television.
≥ NTSC: When connected to an NTSC television.
( [The\Middle\East,\South]Africa,]Saudi[Arabia,[Kuwait,[Australia[and[N.Z.[: “PAL60” is the factory preset.)
Picture/Video Output
Change the video signal format to be
output for JPEG, MPEG4 and DivX
video if picture output is not smooth
during playback.
§6 ≥ NTSC/PAL60: Output will depend on “NTSC Disc Output” setting ( ➜ above).
≥PAL
§7 ≥ Automatic ≥ PAL
≥NTSC/PAL60: Output will depend on “NTSC Disc Output” setting ( ➜ above).
Dynamic Range Compression ≥ Off
≥ On: Adjusts for clarity even when the volume is low by compressing the range of the lowest sound level
and the highest sound level. Convenient for late night viewing. (Only works with Dolby Digital)
Speaker Settings ( ➜ page 31)
Set the delay time for your center and
surround speakers.
≥ Center: 0.0/1.0/2.0/3.0/4.0/5.0 ms
≥ Surround (L/R): 0.0/5.0/10.0/15.0 ms
HT995 & HT995W.book Page 29 Monday, April 24, 2006 6:08 AM