Using sound effects, Changing the sound quality: sound field control – Panasonic SC-HT995W User Manual

Page 34

Advertising
background image

RQ

T

8

7

6

6

34

Usin

g so

und

eff

ect

s

Using sound effects

[Note]

≥ The following sound effects may not be available or have no effect

depending on the type of source, or when headphones are used.

≥ You may experience a reduction in sound quality when these sound

effects are used with some sources. If this occurs, turn the sound effects
off.

≥ It is not possible to turn on Surround Enhancer and Sound Field Control

at the same time.

Press [-SFC].

Each time you press the button:
FLAT:

Cancel (no effect is added) (factory
preset).

MOVIE:

Use this mode when playing movie
software.

SPORT: Simulates sound to make you feel like you are at a sports event.
MUSIC: Adds surround effects to stereo sources.
HEAVY: Adds punch to rock.
CLEAR: Clarifies higher sounds.
SOFT:

For background music.

≥ To check the current setting, press [-SFC].
≥ MOVIE, SPORT and MUSIC are not available when Dolby Pro Logic II

is on, or when playing a disc recorded with a multi-channel source.

≥ You can adjust the volume of the surround speakers to get the best

surround effect (

➜ page 35, Adjusting the volume of each speaker:

Speaker level adjustments).

≥ When MOVIE, SPORT or MUSIC is turned on, you can enjoy audio from

your television in 5.1-channel surround sound (

➜ page 38).

This applies to discs where the dialogue is recorded in the center
channel.
You can make the sound of the center speaker seem like it is coming from
within the television.

Press and hold [—C.FOCUS].

Each time you press and hold the button:
C FOCUS ON

,------.C FOCUS OFF

≥ This does not work when Sound Field Control (MOVIE, SPORT or

MUSIC) is turned on.

≥ This also works when Dolby Pro Logic II is turned on.

Except

[DivX]

Dolby Pro Logic II is an advanced decoder that derives 5-channel
surround (Left and Right Front, Center, Left and Right Surround) from
stereo sound sources, whether or not it has been specifically Dolby
Surround encoded.

Press [

ÎPLII].

Each time you press the button:
Movie:

Movie software, recorded in Dolby Surround.

Music: Stereo sources
Off:

Cancel

≥ This works only in DVD/CD or Digital In (

[HT995W]

) mode.

≥ “ÎPLII” lights when there is effect.
≥ This does not work when audio is output from HDMI AV OUT terminal.

[HT995W]

This does not work when “AUDIO L” or “AUDIO R” is selected

in Audio Mode (

➜ page 38).

You can adjust the amount of bass. The unit automatically selects the
most suitable setting according to the type of playback source.

Press [SUBWOOFER LEVEL].

≥ [DVD-V] [DVD-VR]

SUB W 4 (factory preset)

>SUB W 1>SUB W 2>SUB W 3

^----------------------------------------------------------------------------------------}

When another source is selected

SUB W 2 (factory preset)

>SUB W 3>SUB W 4>SUB W 1

^----------------------------------------------------------------------------------------}

≥ To check the current setting, press [SUBWOOFER LEVEL].
≥ The setting you make is retained, and recalled every time you play the

same type of source, except when Sound Field Control (MOVIE,
SPORT or MUSIC) is turned on.

§

When Sound Field Control (MOVIE, SPORT or MUSIC) is on, the
factory presets are as follows:
– MOVIE: SUB W 4
– SPORT: SUB W 2
– MUSIC: SUB W 1

Changing the sound quality:
Sound Field Control

-H.BASS,
C.FOCUS

SUBWOOFER LEVEL

-SFC

CH SELECT,

TEST

PL

VOLUME

DVD

ONE TOUCH PLAY

SFC

MODE

AC

PRG

RDS

DTS

A

PS

PTY

CD

DVD

D

Enhancing the sound from the
center speaker: Center Focus

Enhancing the stereo sound:
Dolby Pro Logic II

Adjusting the amount of bass:
Subwoofer level

MODE

AC

PRG

RDS

DTS

PL

A

PS

PTY

CD

DVD

D

HT995 & HT995W.book Page 34 Thursday, April 27, 2006 8:17 PM

Advertising
This manual is related to the following products: