Panasonic SA-XR70 EN - Manual (Page 12)

12
St
ep
3
R
Q
T
7523
Settings
Step
3
• Make sure the television’s VIDEO IN terminal and this unit’s VIDEO TV MONITOR OUT terminal are
connected (á pages 4 and 8).
• Turn on the television and select the video input for this unit.
• Note the factory settings and ranges.
1
A. Using the On Screen Display (Customizing your receiver)
Speakers
L: Front left
C: Center
R: Front right
LS: Surround left
RS: Surround right
SB: Surround back
The factory setting is 6 [L-C-R-LS-
RS-SB].
Subwoofer
The factory setting is YES.
Digital Input
The factory settings are:
TV: OPT 1 DVR: OPT 2
DVD: COAX1 CD: COAX2
HDMI: DVD
Input Mode
The factory settings are AUTO.
Speaker Size
The factory settings are:
Front, Center and Surround:
SMALL
Surr Back and Subwoofer: YES
Speaker Distance
The factory settings are:
Front and Center: 10 feet
Surround and Surr Back: 5 feet
Filter Frequency
100: 100 Hz
150: 150 Hz
200: 200 Hz
HQ Sound Mode
The factory settings are:
DISPLAY: OFF
VIDEO:
OFF
Note regarding PCM FIX mode
In rare cases, the unit may have trouble
recognizing the digital signals on discs.
With the PCM signals on CDs, this may cause the
beginning of a track to be cut off. Engage the
PCM FIX mode if this occurs.
When PCM FIX mode is on, the unit cannot
process other signals. This may cause noise to
be output. Select another mode in this case.
The PCM FIX mode remains as set even if the
power is turned off.
• With the PCM FIX mode is on, you cannot play
multi-channel sound. Play is fixed as 2-channel.
1
u/t y/i
^ ^
2 3
4 5 6
7 8 9
DISC 0 10
RECEIVER AV SYSTEM
TV
CD TAPE
-MONITOR
DVD RECORDER VCR
> =
CH
VOLUME
DIRECT TUNING
TUNER/BAND MUTING
h q g
HELP
HQ SOUND
MODE TV/AV
DVD RECORDER
DVD/HDD
SUBWOOFER
-TEST
-SETUP + –
CENTER
FOCUS
MULTI
REAR LEVEL EFFECT
SFC
STEREO/
2CH MIX PL x
DTS
NEO:6
q
r
w
TOP MENU MENU
DIRECT
NAVIGATOR
PLAY
LIST
DISPLAY RETURN
TV VOL – TV VOL +
ENTER
e
DVD
-ANALOG 6CH
q w
OFF
q
r
w
RETURN
TV VOL +
ENTER
e
-TEST
-SETUP
-/--
^
RECEIVER
Turn on.
Enter On Screen Display.
Press and hold
Change the settings.
[e, r, w, q]: Switching
[ENTER]: Entering
Select the item to set, and perform the
setting.
Select “Other Setups”.
Then select the item to set, and
perform the setting.
• To cancel settings
Press [RETURN, TV VOL +].
To exit On Screen Display
Press [e, r] to select “Exit from
SETUP”.
or
Press [RETURN, TV VOL +]
several times until the setup menu
disappears.
1
-TEST
-SETUP
2
q
r
w ENTER
e
For the basic set-up
SETUP ENTER
6 [ ]
YES [ ]
Speakers
Subwoofer
Digital Input
Input Mode
For the advanced set-up
Other Setups
Exit from SETUP
Digital Input
Input Mode
SETUP
ENTER
Speaker Size
Speaker Distance
Filter Frequency
HQ Sound Mode