Reference, Specifications, Product service – Panasonic SA-XR70 EN User Manual

Page 26: Maintenance, Specifications (ihf’78), 26 ref er ence

Advertising
background image

26

Ref

er

ence

R

Q

T

7523

Specifications (IHF’78)

n

AMPLIFIER SECTION

Rated minimum sine wave RMS power output

20 Hz-20 kHz both channels driven
0.09 % total harmonic distortion

100 W per channel (6 Ω)

1 kHz continuous power output both channels driven

0.09 % total harmonic distortion

105 W per channel (6 Ω)

Total harmonic distortion

rated power at 20 Hz-20 kHz

0.09 % (6 Ω)

Power bandwidth

both channels driven, –3 dB

4 Hz-88 kHz (6 Ω, 0.9 %)

Power output each channel driven

0.9 % total harmonic distortion at 1kHz

Front (L/R)

100 W (6 Ω)

Center

100 W (6 Ω)

Surround (L/R/BACK)

100 W (6 Ω)

Load impedance

Front (L/R)

A or B

6-8 Ω

A and B

6-8 Ω

BI-WIRE

6-8 Ω

Center

6-8 Ω

Surround (L/R/BACK)

6-8 Ω

Frequency response

CD, TV, DVD, DVR/VCR1, VCR2, TAPE

4 Hz-88 kHz, ±3 dB

DVD 6CH

4 Hz-44 kHz, ±3 dB

Input sensitivity

CD, TV, DVD/DVD 6CH, DVR/VCR1, VCR2, TAPE 27 mV (200 mV, IHF ’66)

Input impedance

CD, TV, DVD/DVD 6CH, DVR/VCR1, VCR2, TAPE

22 kΩ

S/N (IHF A)

CD, TV, DVD, DVR/VCR1 (Digital Input)

85 dB (103 dB, IHF ’66)

Tone controls

BASS

50 Hz, +10 to –10 dB

TREBLE

20 kHz, +10 to –10 dB

Subwoofer frequency response (–6 dB)

7 Hz–200 Hz

n

FM TUNER SECTION

Frequency range

87.9-107.9 MHz

Sensitivity

11.2 dBf (2 µV, IHF ’58)

50 dB quieting sensitivity

MONO

18.3 dBf (4.5 µV, IHF ’58)

STEREO

38.3 dBf (45 µV, IHF ’58)

Total harmonic distortion

MONO

0.2 %

STEREO

0.3 %

S/N

MONO

73 dB

STEREO

67 dB

Frequency response

20 Hz-15 kHz, +1 dB, –2 dB

Alternate channel selectivity

65 dB

Capture ratio

1.5 dB

Image rejection at 98 MHz

40 dB

Spurious response rejection at 98 MHz

75 dB

AM suppression

50 dB

Stereo separation

1 kHz

40 dB

10 kHz

30 dB

Antenna terminal

75 Ω (unbalanced)

n

AM TUNER SECTION

Frequency range

530-1710 kHz

Sensitivity

20 µV, 330 µV/m

Selectivity

55 dB

IF rejection at 1000 kHz

50 dB

n

VIDEO SECTION

Output voltage at 1 V input (unbalanced)

1±0.1 Vp-p

Maximum input voltage

1.5 Vp-p

Input/output impedance

75 Ω

S-Video

Input

TV, DVD, DVR/VCR1, VCR2

Output

TV MONITOR

Component Video

Input TV,

DVD

Output

TV MONITOR

OSD Video Format

NTSC

n

GENERAL

Power supply

AC 120 V, 60 Hz

Power consumption

135 W

Dimensions (W x H x D)

430 mm x 83 mm x 376 mm

(16-15/16'' x 3-9/32'' x 14-13/16'')

Mass

4.5 kg (9.9 lb.)

n

DIN POWER

1 kHz, T. H. D 1 %

2 x 100 W (6 Ω)

Notes:
1. Specifications are subject to change without notice. Mass and

dimensions are approximate.

2. Total harmonic distortion is measured by the digital spectrum analyzer.

Digital input

(OPTICAL)

2

(COAXIAL)

2

Digital output (OPTICAL)

1

HDMI input

(VER. 1.1)

1

HDMI output

(VER. 1.0)

1

Power consumption in standby mode:

1.2 W

Marking sign is located on bottom of the unit.

Product Service

1. Damage requiring service — The unit should be serviced by qualified

service personnel if:
(a) The AC power supply cord or the plug has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked change in

performance; or

(e) The unit has been dropped or the cabinet damaged.

2. Servicing — Do not attempt to service the unit beyond that described

in these operating instructions. Refer all other servicing to authorized

servicing personnel.

3. Replacement parts — When parts need replacing ensure the servicer

uses parts specified by the manufacturer or parts that have the same

characteristics as the original parts. Unauthorized substitutes may
result in fire, electric shock, or other hazards.

4. Safety check — After repairs or service, ask the servicer to perform

safety checks to confirm that the unit is in proper working condition.

For product information or assistance with product operation:
In the U.S.A., refer to “Customer Services Directory” on page 27.
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at
905-624-5505, or visit the website (www.panasonic.ca), or an authorized
Servicentre closest to you.

Maintenance

To clean this unit, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using chemically treated cloth, read the instructions that came

with the cloth carefully.

Product information

Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby
Laboratories.

“DTS”, “DTS-ES”, “Neo:6” and “DTS 96/24” are trademarks of Digital
Theater Systems, Inc.

Advertising