Panasonic SA-XR70 EN - Manual (Page 14)

14
St
ep
3
R
Q
T
7523
Step
3
Settings
• For details on the Multi control menus and factory settings, refer to page 28.
• Note the factory settings and ranges.
1
B. Using the Multi control (Customizing your receiver) SPEAKERS
SUBW: Subwoofer
L: Front left
C: Center
R: Front right
S: Surround
SB: Surround back
The factory settings are:
SUBW YES
LCR S SB
D-INPUT (Digital input)
The factory settings are:
TV: OPT 1
DVR:OPT 2
DVD:COAX 1
CD: COAX 2
HDMI SEL (HDMI select)
The factory setting is DVD.
IN MODE (Input mode)
The factory settings are AUTO.
SPEAKERS
The factory settings are:
FRONT, CENTER and SURROUND:
SMALL
SUR BACK and SUB-WFR: YES
DISTANCE
The factory settings are:
FRONT and CENTER: 10 FEET
SURROUND and SUR BACK:
5 FEET
FILTER
100: 100 Hz
150: 150 Hz
200: 200 Hz
HQ MODE
The factory settings are:
DISPLAY:OFF
VIDEO: OFF
Note regarding PCM FIX mode
In rare cases, the unit may have trouble
recognizing the digital signals on discs.
With the PCM signals on CDs, this may cause the
beginning of a track to be cut off. Engage the
PCM FIX mode if this occurs.
When PCM FIX mode is on, the unit cannot
process other signals. This may cause noise to
be output. Select another mode in this case.
The PCM FIX mode remains as set even if the
power is turned off
• With the PCM FIX mode is on, you cannot play
multi-channel sound. Play is fixed as 2-channel.
SPEAKERS A B
8 6.1CH DECODING
VCR 2 PHONES
^
MULTI CONTROL INPUT SELECTOR VOLUME
DOWN UP
PUSH ENTER BI-AMP
BI-WIRE
VIDEO IN AUDIO IN L R S-VIDEO IN
MULTI CONTROL
PUSH ENTER
INPUT SELECTOR
SPEAKERS
A B
BI-WIRE
POWER 8
^
1
u/t y/i
^ ^
2 3
4 5 6
7 8 9
DISC 0 10
RECEIVER AV SYSTEM
TV
CD TAPE
-MONITOR
DVD RECORDER VCR
> =
CH
VOLUME
DIRECT TUNING
TUNER/BAND MUTING
h q
HELP
HQ SOUND
MODE TV/AV
DVD RECORDER
DVD/HDD
SUBWOOFER
-TEST
-SETUP + –
CENTER
FOCUS
MULTI
REAR LEVEL EFFECT
SFC
STEREO/
2CH MIX PL x
DTS
NEO:6
q
r
w
w
TOP MENU MENU
DIRECT
NAVIGATOR
PLAY
LIST
DISPLAY RETURN
TV VOL – TV VOL +
ENTER
e
DVD
-ANALOG 6CH
q w
OFF
-/--
VOLUME
-TEST
-SETUP + –
LEVEL
q w
Turn on.
Enter Multi control.
Main menu is displayed.
Change the settings.
Turn to change.
Press to enter.
Select “SETUP 1 (BASIC SETUP).”
Then select the item to set, and
perform the setting.
Select “SETUP 2 (ADVANCE SETUP).”
Then select the item to set, and
perform the setting.
• To cancel settings
Press [MULTI CONTROL].
To finish settings
1. Press [MULTI CONTROL]
several times to select “EXIT”.
2. Press [INPUT SELECTOR].
1
MULTI CONTROL
PUSH ENTER
2
INPUT SELECTOR
For the basic set-up
SETUP 1
SPEAKERS
SPEAKERS, D-INPUT,
HDMI SEL, IN MODE
For the advanced set-up
SETUP 2
SPEAKERS
SPEAKERS, DISTANCE,
FILTER, HQ MODE