Panasonic SA-XR70 EN - Manual (Page 24)

24
O
p
er
at
ions
R
Q
T
7523
Audio settings
Multi control audio settings
Enter Multi
control. Tone 1. Select. 2. Select. 3. Adjust the level.
You can adjust the level of the
bass and treble.
• The STEREO mode must be on
and input must be either analog
or 2-channel PCM signals. You
cannot adjust the tone if DVD
ANALOG 6CH is selected.
Main menu is displayed.
(Multi control menus and
factory settings á page 28) Balance 1. Select. 2. Adjust the balance.
You can adjust the balance of the
front speakers.
Change the
settings.
Second audio output 1. Select. 2. Select. 3. Select.
Select the source to output from
SECOND AUDIO OUT.
DISABLE: For use as the regular
TAPE REC (OUT).
ENABLE: For use as the
SECOND AUDIO OUT.
When “SOURCE” is selected, the
source being played by this unit is
output.
To listen to the radio, select
SOURCE and tune to the station.
4. Select.
Dual program 1. Select. 2. Select. 3. Select.
When the input signal is Dolby
Digital and “DUAL” appears in the
display, the audio to be output is
set.
MAIN: Main audio output
SAP: Sub channel audio output
MAIN+SAP: Main and sub
channel audio output
Dynamic range
compression
1. Select. 2. Select. 3. Select.
Change this setting to listen to
software recorded with Dolby
Digital at low volume (such as late
at night) maintaining audio clarity.
It reduces the peak level in loud
scenes without affecting the sound
field.
OFF: The software is played with the original dynamic range.
STANDARD: The level recommended by the producer of the software for
household viewing.
MAX: The maximum allowable compression (recommended for night viewing).
To finish settings A/D attenuator 1. Select. 2. Select. 3. Select.
1. Press [MULTI CONTROL]
several times to select
“EXIT”.
2. Press [INPUT SELECTOR].
Turn the A/D attenuator on if
“OVERFLOW” lights frequently
when using 2-channel analog
input or DVD ANALOG 6CH input.
SPEAKERS
A B
POWER 8 6.1CH DECODING
VIDEO IN AUDIO IN L R
VCR 2
PHONES
^
MULTI CONTROL INPUT SELECTOR VOLUME
DOWN UP
PUSH ENTER BI-AMP
S-VIDEO IN
BI-WIRE
MULTI CONTROL
PUSH ENTER
INPUT SELECTOR
MULTI CONTROL
1
MULTI CONTROL
PUSH ENTER
INPUT SELECTOR
TONE
INPUT SELECTOR
BASS
BASS TREBLE
INPUT SELECTOR
0dB
-10 dB +10 dB
INPUT SELECTOR
BALANCE
INPUT SELECTOR
L R
2
INPUT SELECTOR
• To cancel
MULTI CONTROL
PUSH ENTER
• To select
Turn to
change.
Press to
enter.
INPUT SELECTOR
OPTION
INPUT SELECTOR
SECOND-A
INPUT SELECTOR
ENABLE
DISABLE ENABLE
INPUT SELECTOR
SOURCE
SOURCE, CD, TV, DVD,
DVR/VCR1, VCR 2, TAPE
INPUT SELECTOR
OPTION
INPUT SELECTOR
DUAL PRG
INPUT SELECTOR
MAIN
MAIN, SAP, MAIN+SAP
INPUT SELECTOR
OPTION
INPUT SELECTOR
DR COMP
INPUT SELECTOR
OFF
OFF, STANDARD, MAX
INPUT SELECTOR
OPTION
INPUT SELECTOR
A/ D ATT
INPUT SELECTOR
OFF
OFF ON