Panasonic Acr14CF.tmp - Manual (Page 14)

Location of Controls
8
Base unit display
“ ” flashes when no new messages can be
recorded. Erase unnecessary messages
(p. 27).
“
E” flashes until you set the time and day, and
flashes after a power failure. If it is flashing,
set the time and day (p. 13).
“ ” functions as follows.
Message counter shows:
—the total number of recorded messages (p. 26).
—the selected volume level while you are adjusting the speaker volume
(p. 16).
—“ ” when your greeting message was not recorded correctly (p. 16).
—“ ” during programming (p. 12).
—“ ” when [0] is pressed for Toll Saver mode when selecting the
number of rings (p. 18).
Off (invisible) The line is free.
On The line is being used.
Flashing Answering System is answering a call (p. 24).
Flashing rapidly A call is being received.
FULL FULL
RINGER
OFF
LINE LINE IN USE IN USE
2 4 1
3
1
FULL
2
3 LINE IN USE
4