Panasonic Acr14CF.tmp - Manual (Page 20)

Programmable Settings
14
Dialing Mode
If you have touch tone service, set the dialing mode to “Tone”. For rotary or
pulse service, set to “Pulse”. The factory preset is “Tone”.
Ringer Volume
You can set the handset ringer volume to high, medium, low, or off.
The factory preset is HIGH. If the handset ringer is turned off, the handset
will not ring.
To set the ringer volume to high (preset), medium or low, press [d] or [B].
• To increase volume, press [
B]. To decrease volume, press [d].
• To stop ringing, press [OFF] or [VOICE ENHANCER].
To turn the ringer off, press and hold [d] until 2 beeps sound.
To turn the ringer on, press [d] or [B].
• The handset will ring at the low level.
• You can adjust the ringer volume while a call is ringing. Press [d] or [B]
while the handset is ringing. To turn the ringer off, press and hold [d] until
2 beeps sound.
Temporary ringer off
While the handset is ringing for an outside call, you can turn the ringer off
temporarily by pressing [OFF]. The handset will ring again as normal the
next time a call is received.
1 Press [VOICE ENHANCER].
• The indicator flashes.
2 Press [8].
• The current setting is displayed on the base unit.
1: Pulse 2: Tone
3 To select “Pulse”, press [1].
To select “Tone”, press [2].
4 Press [VOICE ENHANCER].
• The handset beeps and the indicator light goes out.
Handset
Handset