Polaris Outlaw 9920783 - Manual (Page 120)

117
MAINTENANCE AND LUBRICATION
Lights
Headlight Lamp Replacement
1. Remove the wire harness connector from the
back of the headlight.
2. On the left headlamp, grasp the bulb housing and
turn it counterclockwise (1) to remove the bulb.
On the right headlamp, turn the bulb housing
clockwise (2) to remove the bulb.
3. Apply dielectric grease to the socket and install
the new bulb. Rotate firmly.
NOTE: The bulb must be positioned so the harness
installs into the lamp at outer side.
4. Reinstall the connector to the back of the headlight.
1
2