Polaris Outlaw 9920783 - Manual (Page 140)

137
MAINTENANCE AND LUBRICATION
Battery Charging (Sealed Battery)
The battery included with your ATV is sealed and the sealing strip cannot be removed. Use
a voltmeter or multimeter to measure DC voltage. A fully charged battery will register 12.8
V or higher. If the voltage is less than 12.8 volts, recharge the battery. Use the remote
charging terminals under the right front cab. Removing the cab is not necessary.
NOTE: The Polaris Battery Tendert battery charger can be left connected during the
storage period and will automatically charge the battery if the voltage drops below
a pre-determined point.