Polaris Outlaw 9920783 - Manual (Page 135)

132
MAINTENANCE AND LUBRICATION
Vehicle Immersion
1. Turn the fuel valve off.
2. Drain water from the air box and clean the air filter (if equipped). See page 114.
3. Drain the fuel/water from the carburetor for about 10 seconds.
4. Remove the spark plug. See page 125.
WARNING
Fluids will be ejected through the spark plug hole and may cause serious injury to face
or other body parts. Stand clear of the spark plug while performing the following
steps.
5. Intermittently and briefly touch the starter button in half-second intervals to SLOWLY
rotate the engine three or four times. Water will eject from the spark plug hole.