Polaris Outlaw 9920783 - Manual (Page 139)

136
MAINTENANCE AND LUBRICATION
Battery Installation
1. Place the battery in the battery holder.
2. Connect and tighten the red (positive) cable first, then connect and tighten the black
(negative) cable.
3. Attach the hold-down strap and reinstall the front cab.
4. Verify that cables are properly routed.
NOTE: When installing a new battery, make sure it’s fully charged prior to its initial use.
Using a new battery that has not been fully charged can damage the battery and
result in a shorter life. It can also hinder vehicle performance.