Polaris Outlaw 9920783 - Manual (Page 54)

51
FEATURES AND CONTROLS
Lights
WARNING
Operating the ATV on streets or roads, especially in
darkness, could result in an accident and serious
injury or death. Your ATV is not equipped with
highway-approved lights. It’s designed for and must
be used for off-road use only. Use caution and
drive at reduced speeds in conditions of reduced
visibility such as fog, rain and darkness.
The light switch is located on the left handlebar. It’s used
to turn the lights on and off and to switch the lights from
HI to LO.
NOTE: The lights won’t work unless the key is in the ON position and the engine stop
switch is in the RUN position.