Philips VRZ250AT - Manual (Page 14)

14 Automatic Channel Setup (cont’d)
Reviewing Memorized Channels
3
Press the PLAY/o button or the STOP/p button to select
CH MEMORY REVIEW, then press the F.FWD/B button.
A list of programmed channels will appear on-screen.
● If all the programmed channels don’t fit on the screen, press
the F.FWD/B button to see the remaining channels. Then
press the REW(ind)/s button to return to the first screen of
channels.
● If you do not press any buttons within 10 seconds, you will
either go to the next screen of channels or you will return to
the previous menu.
4
Press the STATUS/EXIT button once or twice to exit.
1
Press the MENU button.
SELECT op CHOOSE B
→
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
2
Press the PLAY/o button or the STOP/p button to select
TUNER SET UP, then press the F.FWD/B button.
POWER EJECT VCR/TV
1 2 3
4 5 6
7 8 9
0
CHANNEL
MEMORY
STATUS/EXIT CLEAR SLOW MENU
REWIND /PLAY F.FWD
REC/OTR PAUSE/STILL /STOP
+100
TIME SEARCH SPEED
1
2-3
4
SELECT op CHOOSE B
→
TV
CABLE TV ON
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO
ON
2ND AUDIO
TO END PUSH EXIT
Note: TV STEREO and 2ND AUDIO are not available in the TUNER
SET UP menu of the VRZ220.
• You can not enter the TUNER SET
UP menu during a recording.
Helpful Hint
VRZ220/250 layout 4/8/99 10:11 PM Page 14