Philips VRZ250AT - Manual (Page 40)

POWER EJECT VCR/TV
1 2 3
4 5 6
7 8 9
0
CHANNEL
MEMORY
STATUS/EXIT CLEAR SLOW MENU
REWIND /PLAY F.FWD
REC/OTR PAUSE/STILL /STOP
+100
TIME SEARCH SPEED
40 Hi-Fi Stereo Sound System (VRZ250 only)
1
Press the MENU button.
2
Press the PLAY/o button or the STOP/p button to select
VCR SET UP, then press the F.FWD/B button.
3
Press the PLAY/o button or the STOP/p button to select
AUDIO OUT, then press the F.FWD/B button.
Multi-Channel Television Sound system broadcasts are automati-
cally recorded in Hi-Fi stereo sound. To play in Hi-Fi stereo the
tapes recorded in Hi-Fi stereo, however, you’ll need to follow
steps 1 - 9.
4
Press the PLAY/o button or the STOP/p button to select
HIFI. ON will appear to the right of HIFI on-screen.
5
Press the STATUS/EXIT button.
SELECT op
→ HIFI ON
MONO
TO END PUSH EXIT
SELECT op CHOOSE B
→ REPEAT PLAY OFF
ON SCREEN MODE
AUDIO OUT
LANGUAGE
TO END PUSH EXIT
• All programs are automatically
recorded in both Hi-Fi stereo sound
and in monaural sound.
• The audio level of a tape recorded
in Hi-Fi stereo will differ from the
audio level of a tape not recorded
in Hi-Fi stereo.
• Normally, HIFI should be selected
from the AUDIO OUT menu for
playback with Hi-Fi sound. But, you
can change the selection to MONO
if you want monaural audio play-
back. To do this, follow steps 1 - 3
above. At step 4, press the PLAY/o
button or the STOP/p button to
select MONO. Press the
STATUS/EXIT button. HIFI will dis-
appear from the status display.
• If you play non-Hi-Fi tapes while the
VCR is set to HIFI, HIFI will disap-
pear from the status display and the
tape will play in monaural sound.
Please see additional notes
on page 43.
Helpful Hints
SELECT op
→ HIFI ON
MONO
TO END PUSH EXIT
1
2-3
5
4
VRZ220/250 layout 4/8/99 10:12 PM Page 40