Philips VRZ250AT - Manual (Page 39)

POWER EJECT VCR/TV
1 2 3
4 5 6
7 8 9
0
CHANNEL
MEMORY
STATUS/EXIT CLEAR SLOW MENU
REWIND /PLAY F.FWD
REC/OTR PAUSE/STILL /STOP
+100
TIME SEARCH SPEED
Multi-Channel Television Sound System (VRZ250 only) (cont’d) 39
1
Press the MENU button.
2
Press the PLAY/o button or the STOP/p button to select
TUNER SET UP, then press the F.FWD/B button.
3
Press the PLAY/o button or the STOP/p button to select
TV STEREO or 2ND AUDIO. Then, press the F.FWD/B
button. ON will appear to the right of your selection.
4
Press the STATUS/EXIT button.
5
To play a tape, press the PLAY/o button. Or, to record,
select the channel to be recorded using the CHANNEL
o /p buttons, then go to step 6.
6
Press the REC(ord)/OTR button to start recording.
SELECT op CHOOSE B
→ TV
CABLE TV ON
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO
ON
2ND AUDIO
TO END PUSH EXIT
• You can only receive and record in
stereo or second audio programs
that are broadcast in second audio
or stereo. You can only play in
stereo or second audio tapes that
were recorded in stereo or second
audio. Please see page 38 to deter-
mine if the program you want to
watch/record is being broadcast in
stereo or second audio.
• If you select second audio when
second audio is not available, the
VCR will record normal audio.
Helpful Hints
1
2-3
4
5
6
VRZ220/250 layout 4/8/99 10:12 PM Page 39