Philips MDR515H / F7 - Manual (Page 113)

113 EN EN
Editing
Function Setup
Playback
Recording
Basic Setup
Connections
Introduction
Others
Español
SETUPS
1 Press [MENU] in stop mode and use
[
K /L] to select “General Setting”,
then press [OK].
2 Use [
K /L] to select “HDMI”, then
press [OK].
Playback
Display
Video
Recording
Clock
Channel
HDMI
3 Use [
K /L] to select a desired item,
then press [OK].
Format
HDMI Audio
RGB Range
fun-Link (HDMI CEC) 1
2
3
4
4 When you finish with the setting,
press [MENU] to exit.
1
Format (Default : RGB)
You can select the color space for HDMI output.
Set the appropriate color space for your display device.
Use [
K/ L] to select a setting, then press [OK].
• When the connected device is not compatible with the Y/
Cb/Cr, HDMI signal is output as RGB regardless of the setting.
Format
RGB
YCbCr
2
HDMI Audio (Default : ON)
If you do not want to output the audio through HDMI
(Such as when you digitally output the audio through the
COAXIAL DIGITAL AUDIO OUTPUT jack to your audio
system, etc.), you can set the HDMI audio output off.
Use [
K/ L] to select a setting, then press [OK].
• Set to “OFF” when the HDMI sound is not output.
HDMI Audio
ON
OFF
Your setting will be activated.
HDMI
Instructions continue on the next page.