Zoom, Marker setting, Special playback – Philips MDR515H / F7 User Manual

Page 75: 75 en en, Zoom marker setting

Advertising
background image

75

EN

EN

Recording

Playback

Basic Setup

Connections

Editing

Introduction

Function Setup

Others

Español

SPECIAL PLAYBACK

Note

• When selecting a smaller factor than the current one,

the zoom area will not be displayed.

• To exit the zoom menu, press [RETURN] repeatedly

at step 3.

• To cancel the zoom function, select “x1.0” using

[

K/ L], then press [OK] at step 3.

• When you zoom a picture during a slide show, the

slide show will be put in the pause mode. Press
[PLAY

B] to resume the slide show and the zoom

function will be turned off.

1) During playback, press [DISPLAY].

2) Use [

{ /

{ B] to select

menu.

e.g.) DVD-video

1/ 5

1/ 5

DVD

0:01:00 / 1:23:45

Video

3) Use [

K /L] to select a desired zoom factor to zoom,

then press [OK].

1/ 5

1/ 5

DVD

Ч 1.2
Ч 1.5
Ч 2.0

0:01:00 / 1:23:45

Video

Zoom menu will appear.
There are four options
(x1.0, x1.2, x1.5 and x2.0), these are displayed
excluding the current zoom rate.

Zoom area will be displayed.

4) Use [

K /L / { /

{ B] to select a desired zoom position,

then press [OK].

Zoom playback will start.

This feature allows you to assign a specific point on a title
to be called back later.

1) During playback, press [DISPLAY] to bring up the

display menu.
If the display menu is already shown, skip to step 2.

2) Use [

{ /

{ B] to select

to display the marker list.

e.g.) DVD-video

1/ 5

1/ 5

DVD

0:01:00 / 1:23:45

Video

3) Use [

K /L] to select a desired marker number.

When it reaches the desired point, press [OK].

1/ 5

1/ 5

DVD

---
---
---
---
---
---

1

2

3

4

5

6

0:01:00 / 1:23:45

Video

4) To return to the marker later:

Use [

K /L] to select the desired marker number,

then press [OK].

Note

• To clear a marker, select the marker number to be

cleared, then press [CLEAR].

• All markers will be erased when you operate these

operations listed below.

– opening the disc tray (DVD/CD only)
– turning the unit to the standby mode (DVD/ CD only)
– make additional recording on the disc (DVD only)
– editing any title (DVD only)
– dividing the title (HDD only)
– deleting a scene of the title (HDD only)
• You can mark up to 6 points.
• Marker setting is not available when you play back

the video CD with PBC function.

Zoom

Marker Setting

Advertising
This manual is related to the following products: