Philips MDR515H / F7 - Manual (Page 35)

35 EN EN
Connections
Basic Setup
Recording
Playback
Editing
Introduction
Function Setup
Others
Español
Connections
B
as
ic Setu
p
Basic Setup
Recording
Playback
Editing
Introduction
Function Setup
Others
Español
TUNER SETTINGS
You can easily switch the analog TV (NTSC) and digital TV
(ATSC) with the remote control.
Press [DTV/TV] on the remote control.
• The analog mode and digital mode switch alternately.
About digital TV broadcasting:
With its high definition broadcast, digital broadcasting far
surpasses analog broadcasting in both its picture and
sound quality.
What is the minor channel?
By using high compression technology, digital
broadcasting offers a service that enables multiple signals
to send simultaneously.
Therefore, you can select more than one program per
major channel since digital broadcasting technology
distinguishes between multiple channels broadcast by a
single network.
: change automatically
: change manually by using [CHANNEL / ] or
[the Number buttons]
CH4-1
18:00
18:30
19:00
19:30
20:00
CH4-2
CH4-1
CH4-1
CH4-3
smallest
CH
smallest
CH
CH4-3
CH4
CH4-2 CH4-1
smallest
CH
smallest
CH
ATSC (digital mode) NTSC (analog mode)
[Air Time]
major channel minor channel
Select channels by using [CHANNEL / ] or
[the Number buttons] found on remote control.
[CHANNEL / ]
Use [CHANNEL / ] to change the channel.
[the Number buttons]
Press the channel number with [the Number buttons] to
select a channel you want to watch.
<Analog TV Channels>
Enter the channel number with [the Number buttons] to
select a channel you want to watch.
For 1-digit number
e.g.) 2 ch:
[0] + [2], [2] + [•] or
[2] + leave it for 2 seconds.
For 2-digit number
e.g.) 12ch:
[1] + [2]
<Digital TV Channels>
Enter the major and minor channel number with
[the Number buttons] to select a channel you want to
watch.
For 1-digit number
e.g.) 2.1 ch:
major channel
[0] + [2] or [2] + [•]
minor channel [0] + [1], [1] + [•] or
[1] + leave it for 2 seconds.
For 2-digit number
If 2 channel numbers are pressed consecutively, that
number will become the major channel.
e.g.) 35.1ch:
major channel
[3] + [5] + [•]
minor channel [1]
• If you enter 1 or 2 digit for major channel and leave it for
2 seconds, the number will be taken as the major
channel and lowest minor channel of the major channel
will be displayed.
Note
• It may take up to 5 to 7 seconds to switch the digital
TV channels.
• In digital TV broadcasting, 2 or more channels, called
minor channels, are simultaneously broadcast on one
main channel, called major channel.
Switching Analog Mode / Digital Mode
Channel Selection