11 major operating controls and their functions, Front view – Panasonic WJ-ND400 User Manual

Page 11

Advertising
background image

11

Major Operating Controls and Their Functions

(1) Error indicator [ERROR]

Blinks when errors or problems with the recorder's operation
occur.

(2) Alarm indicator [ALARM]

Refer to the Operating Instructions (PDF file) for more
information about alarms.

(3) Alarm suspension indicator

[ALARM SUSPEND]

Refer to the Operating Instructions (PDF file) for more
information about alarm suspension.

(4) Buzzer stop button [BUZZER STOP]

Use to turn off the buzzer after an alarm or error occurs.
Refer to the Operating Instructions (PDF file) for more
information about alarms and errors.

(5) LCD

Displays the recorder's status (errors etc.) and functions that
are operated using the buttons on the front panel.

(6) HDD indicators ("HDD1" to "HDD9")

HDD access indicator (right side)

Indicates the access status and problems of the HDD.
When errors occur on an HDD in RAID5/RAID6 mode,
the indicator lights or blinks red.

The indicators display the status of the drives from HDD1 to
HDD9, but if a system errors occur, each indicator has the
same display.

Front View

(8)

(16)

(15)

(9) (10) (11) (12) (13)

(14)

(6)

(5)

(3)

(2)

(7)

(1)

(4)

Blinks red

: System errors

Blinks orange

: Temperature is too high or low.

Cooling fan stopped, etc.

Blinks

: Alarm has occurred

Lights

: Alarm output stopped

Off

: Alarm is resolved or no alarm has

occurred

Lights

: Alarm suspend stopped

Off

: Alarm is not suspended

Blinks green

: Accessing HDD

Off

: Not accessing HDD

Lights red

: Errors have occurred on the internal

HDD
(Data can be recovered by replacing
HDD.)

• When in RAID5 mode, the first HDD

has errors

• When using RAID6, the first two

HDDs have errors.

Blinks red

: Errors have occurred on the internal

HDD
(Data cannot be recovered even if
HDD is replaced)

• When in RAID5 mode, the second

HDD has errors

• When in RAID6 mode, the third HDD

has errors

Lights orange and
red

(Alternately)

: Recovering data from drive in RAID5/

RAID6 mode.
(This indicator looks orange during
high-speed processing.)

ND400_Basic.book 11 ページ 2008年4月8日 火曜日 午後3時59分

Advertising