Panasonic EB-GD35 - Manual (Page 22)

Changing the Security Codes
1 From Idle mode press B 8 to enter the Security menu
2 Use e to select Phone Lock, PIN or PIN2
3 Use f until
Change is displayed in main option area and press
B
4 Enter the current code and press B
5 Enter the new code and press B
6 Verifythe new code and press B
Restricting Calls
Call Barring
This function is SIM dependent. Call Bar is used to restrict certain
outgoing and/or incoming calls. Call Bar is controlled bya security
password supplied byyour Service Provider. When updating or
checking the status of Call Bar the phone must be registered with a
network.
1 From Idle mode press B 82 to enter the Call Bar menu
and press B
2 Use e to select the level of call barring that you want to apply
and press B
3 Enter Call Bar password and press B
Barred Dialling
This function is network dependent. Barred Dial enables you to bar
all phone numbers pre-programmed in the SIM from being dialled on
the phone. To use this function PIN2 is required.
From Idle mode press B 86 and press B to enable
Barred Dial , enter PIN2 and press B
18
Phone Security