Panasonic EB-GD35 - Manual (Page 35)

Service Charges
This function is SIM dependent. To maintain control over the cost of
calls that are made, the phone can be set to restrict use to a finite
number of units overall.
Setting the Unit Price
Firstly, a price per unit must be entered. This is the cost that the
Service Provider charges for one unit of call time.
1 From Idle mode press B 622 to enter the Price/Unit
menu
2 Press B to edit the values
At this point you must enter your PIN2 or lock code to continue.
3 Enter a currencyunit (up to three characters) and press B
4 Enter a price and press B
Setting the Maximum Unit Level
1 From Idle mode press B 623 to enter the Max Cost
menu
2 Press B to edit the values
At this point you must enter your PIN2 or Lock Code to continue.
3 Enter a value (number of units) which is to be the maximum
permitted, and the corresponding cost is displayed
4 Press B to accept
Note
: The duration of one unit may vary during the day, peak and off-peak
times. Therefore, the call charge can be calculated accordingly. Call charge
information may not give an accurate reflection of the tariffs charged by your
Service Provider.
31
Call Information