Panasonic EB-GD35 - Manual (Page 25)

Setting the Alarm
If you have not already set the clock, you are prompted to do so prior
to setting the alarm.
1 From Idle mode press B 433 to enter the Alarm Set
menu
2 Enter the digits for the time using 24 hour clock and press B
3 Use e to select the frequencyof the alarm and press B
When the phone is in Idle mode and the clock displayhas been
enabled, ? is displayed next to the clock display, to indicate the
alarm is set.
Caution
: Ensure that the setting of the alarm does not contravene any
regulations whereby it may automatically power on when in an aircraft or
medical facility etc - see “Important Information” page 50.
Muting the Alarm
When the set time is reached the alarm sounds and the display
flashes an alarm message. The alarm sounds for 30 seconds. If the
alarm is due during a call, it activates vibration alert.
To end the alarm press anykey
Disabling the Alarm
1 From Idle mode press B 433 to enter the Alarm Set
menu and press B
2 Use e to select Disabled and press B
Once disabled, you can re-enable the alarm using the same
procedure.
Adjusting the Alarm Time
1 From Idle mode press B 433 to enter the Alarm Set
2 Press and hold C to remove the current alarm time
3 Enter the digits for the time and press B
4 Use e to select the frequencyof the alarm and press B
Note
: Alarm alerts are dependent on tones/vibration settings.
21
Applications