Panasonic PT-D12000U - Manual (Page 67)

ENGLISH – 67
Basic Operation
Press ENTER. 10.
The “BRIGHT ADJUST” screen will be •
displayed.
BRIGHT ADJUST
BRIGHT INSIDE
BRIGHT OUTSIDE
Press
▲▼ to select “BRIGHT
11.
INSIDE”.
Press ENTER. 12.
The “BRIGHT INSIDE” adjustment screen will •
be displayed.
BRIGHT INSIDE
INTERLOCKED
WHITE
RED
GREEN
BLUE
ON
0
0
0
0
When “INTERLOCKED” is set to “OFF”, •
individual adjustment of “RED”, “GREEN” and
“BLUE” will be possible.
Press
▲▼ to select an item, and
13.
press
◄► to adjust the setting.
Once adjustment is complete, press MENU to •
return to “BRIGHT ADJUST”.
Press
▲▼ to select the part of
14.
“UPPER”, “LOWER”, “RIGHT”,
“LEFT”.
Use
◄► to adjust the width for
15.
correcting the “BRIGHT INSIDE”
setting (0 to 255).
Press
▲▼ to select “BRIGHT
16.
OUTSIDE”.
BRIGHT INSIDE
BRIGHT OUTSIDE
OUTSIDE AREA
Press ENTER. 17.
The “BRIGHT OUTSIDE” adjustment screen will •
be displayed.
BRIGHT OUTSIDE
INTERLOCKED
WHITE
RED
GREEN
BLUE
ON
0
0
0
0
When “INTERLOCKED” is set to “OFF”, •
individual adjustment of “RED”, “GREEN” and
“BLUE” will be possible.
Press
▲▼ to select an item, and
18.
press
◄► to adjust the setting.
BRIGHT adjustment
(right)
Edge blending width (right) Projection
range
Marker
BRIGHT OUTSIDE
BRIGHT INSIDE
Note
The Bright Inside adjustments are used to match •
the projector’s main-screen-area black levels to the
level within the blended area. The Bright Outside
adjustments may be used to fine adjust the thin
borders on either side of the blend area, but are
often not needed.
When a rear screen or screen with a high gain •
is used, the blended areas may appear to be
discontinuous depending on the viewing position.
Frame delay
When 1 080/60i, 1 080/50i and 1 080/24sF signals are
being input, this simplifies image processing so that
the video frame delay is shortened.
Press
▲▼ to select “FRAME
1.
DELAY”.
EDGE BLENDING
FRAME DELAY
RASTER POSITION
OFF
DEFAULT