Panasonic PT-D12000U - Manual (Page 68)

68 – ENGLISH
How to use ADVANCED MENU (continued)
Press
◄► to switch “FRAME
2.
DELAY”.
The setting will change as follows each time •
◄► is pressed.
DEFAULT SHORT
DEFAULT: •
This is the standard setting.
SHORT: •
Shortens the delay at the expense of some picture
quality.
Note
When “FRAME DELAY” is set to “SHORT”, •
deterioration in the picture quality will occur.
Furthermore, the noise reduction function cannot be
used.
Raster position
When the scaler is set such that the image is smaller
than the display area, the image can be moved to any
position inside the display area.
Press
▲▼ to select “RASTER
1.
POSITION”.
EDGE BLENDING
FRAME DELAY
RASTER POSITION
OFF
DEFAULT
Press ENTER. 2.
The “RASTER POSITION” screen will be •
displayed.
RASTER POSITION
V
H
0
0
Press
▲▼◄► to adjust the
3.
position.
PT-D12000U
„
When 5:4 pictures are displayed
(when SXGA signals are input)
Pressing ► button will move
the image to the right.
Pressing ◄ button will move
the image to the left.
When 16:9 pictures are displayed
(when HDTV or 480p pictures are input or
16:9 is selected in the SIZE mode)
Pressing ▲ button will move
the image upward.
Pressing ▼ button will move
the image downward.
PT-DZ12000U
„
When 4:3 pictures are displayed
Pressing ► button will move
the image to the right.
Pressing ◄ button will move
the image to the left.
Press MENU three times. 4.
The on-screen indications disappear and the •
normal screen appears again.