Printronix SL5000e User Manual

Page 19

Advertising
background image

RFID CONTROL Menu Items

19

Tag Write Cnt

This menu item displays on the control panel’s LCD the number of
tags written since the last Clear Tag Stat operation has been
initiated. (See “Clear Tag Stat” below.)

Failed Tag Cnt

This menu item displays on the control panel’s LCD the number of
failed tag write attempts since the last Clear Tag Stat operation has
been initiated. (See “Clear Tag Stat” below.)

Clear Tag Stat

This menu item clears the Tag Write Cnt and Failed Tag Cnt menu
items.

F/W-Version

This menu item displays on the control panel’s LCD the reader
firmware version.

Precheck Tags

NOTE: This menu item applies to Class 1 tags only.

When this menu item is set to Enable, the RFID encoder checks the
tags for a pre-programmed quality code. If the code is absent, the
tag immediately fails and the selected Error Handling mode is
performed (Overstrike, None, or Stop). The default is Disable.

Overstrike Style

This menu item selects the style of the overstrike pattern. The
default is Grid.

When it is set to Grid, a grid pattern prints when it overstrikes.
When it is set to Error Type Msg, an error message prints that
indicates which error occurred (see Table 1).

Advertising