Printronix SL5000e - Manual (Page 46)

Chapter 2 Software Migration Tools (SMT)
46
Selecting The Tools
1. Press until QUICK SETUP displays.
2. If necessary, press ↓ and ↵ at the same time to unlock the
↵ key.
3. Press
↓ until SMT: Sel Toolset displays.
4. Press
↓ until Toolset [1] (PGL emulation) or Toolset [2] (PPI1
emulation) displays.
5. Press
↵ to select it.
6. Press
↓ until SMT: Select Tool displays.
7. Press
↓ until the desired tool displays.
8. Press
↵ to select it.
9. Press
↓ and ↵ at the same time to lock the ↵ key, then press
PAUSE to take the printer offline.
10. Press PAUSE again to put the printer online.
..
.