Printronix SL5000e - Manual (Page 38)

Chapter 2 RFID PGL Commands
38
Read Tag
IMPORTANT This command is still supported but no longer in development.
We recommend you develop your application using the
RFRTAG command as defined on page 30.
Read Tag is not a command, but an element of the ALPHA and
BARCODE commands. See “Alphanumerics” and “Bar Codes” in
the
IGP/PGL Programmer’s Reference Manual for more
information.
Purpose Embed RFID data into an ALPHA or BARCODE data
field.
Format <RDI> position,length[,format];
<RDI> The RFID Data Indicator character, as
defined by the RFREAD parameter in the
ALPHA or BARCODE commands. See
the ALPHA and/or BARCODE command
description for details.
position The decimal number that specifies the
starting position of the data inside the
transponder.
length The decimal number that specifies the
length of the data to be read.
format Replace the optional format parameter
with any non-zero number to convert the
data to hexadecimal format.