Panasonic PT-D10000U - Manual (Page 45)

ENGLISH – 45
Basic Operation
Changing the picture
aspect ratio
You can change the aspect ratio for projected pictures
to match the input signal.
1. Press ASPECT on the remote
control.
The setting will change as follows each time
ASPECT is pressed.
*1: PT-D10000U Only
*2: PT-DW10000U Only
Note
Some aspect ratios may not be available for
selection depending on the input signal. Refer to
“Adjusting the aspect ratio” for details. (p. 57)
•
•
VID AUTO (PRIORITY)
S1 AUTO
VID AUTO
HV FIT
H FIT *2
DEFAULT
THROUGH
16:9 *1
4:3 *2
S4:3 *1
VID AUTO (PRIORITY)
S1 AUTO
VID AUTO
HV FIT
H FIT *2
DEFAULT
THROUGH
16:9 *1
4:3 *2
S4:3 *1