Panasonic PT-D10000U - Manual (Page 53)

ENGLISH – 53
Basic Operation
Noise reduction setting
This can be used to adjust pictures if they contain
interference as a result of poor quality of the input
signal.
1. Press ▲▼ to select “NOISE
REDUCTION”.
2. Press ◄► to switch “NOISE
REDUCTION”.
The setting will change as follows each time
◄► is pressed.
Dynamic iris setting
Pictures with the optimum contrast will be displayed
by automatically providing aperture compensation and
signal compensation to suit the pictures concerned.
1. Press ▲▼ to select “DYNAMIC
IRIS”.
•
PICTURE
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
COLOR TEMP.
GAMMA
SHARPNESS
NOISE REDUCTION
DYNAMIC IRIS
SYSTEM SELECTOR
MENU SELECT
CHANGE
NATURAL
0
0
10
1
DEFAULT
DEFAULT
0
OFF
OFF
AUTO 1
PICTURE
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
COLOR TEMP.
GAMMA
SHARPNESS
NOISE REDUCTION
DYNAMIC IRIS
SYSTEM SELECTOR
MENU SELECT
CHANGE
NATURAL
0
0
10
1
DEFAULT
DEFAULT
0
OFF
OFF
AUTO 1
2 (Medium) 3 (High)
1 (Low) OFF (No correction)
2 (Medium) 3 (High)
1 (Low) OFF (No correction)
PICTURE
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
COLOR TEMP.
GAMMA
SHARPNESS
NOISE REDUCTION
DYNAMIC IRIS
SYSTEM SELECTOR
MENU SELECT
CHANGE
NATURAL
0
0
10
1
DEFAULT
DEFAULT
0
OFF
OFF
AUTO 1
PICTURE
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
COLOR TEMP.
GAMMA
SHARPNESS
NOISE REDUCTION
DYNAMIC IRIS
SYSTEM SELECTOR
MENU SELECT
CHANGE
NATURAL
0
0
10
1
DEFAULT
DEFAULT
0
OFF
OFF
AUTO 1
2. Press ◄► to switch “DYNAMIC
IRIS”.
The setting will change as follows each time
◄► is pressed.
To further adjust the selected
compensation amount
3. Select “USER” in step 2.
4. Press ENTER.
The “DYNAMIC IRIS” screen will be displayed.
5. Use ▲▼ to select the item to be
adjusted, and then use ◄► to
adjust the amount of correction.
AUTO IRIS (Automatic aperture
adjustment)
MANUAL IRIS (Fixed aperture
adjustment)
DYNAMIC GAMMA (Signal
compensation amount
adjustment)
Note
The contrast is set to the maximum level when
“DYNAMIC IRIS” is set to “3.”
When “FRAME DELAY” is set to “SHORT”, the
noise reduction setting function cannot be used.
•
■
•
■
■
■
•
•
1 (Low) OFF (No correction)
2 (Intermediate) 3 (High) USER
1 (Low) OFF (No correction)
2 (Intermediate) 3 (High) USER
DYNAMIC IRIS
AUTO IRIS
MANUAL IRIS
DYNAMIC GAMMA
MENU SELECT
CHANGE
OFF
OFF
OFF
DYNAMIC IRIS
AUTO IRIS
MANUAL IRIS
DYNAMIC GAMMA
MENU SELECT
CHANGE
OFF
OFF
OFF
3 (High) 2 (Intermediate)
OFF (No automatic correction) 1 (Low)
3 (High) 2 (Intermediate)
OFF (No automatic correction) 1 (Low)
63 (High) 2…62 (Intermediate)
OFF (No fixed iris) 1 (Low)
63 (High) 2…62 (Intermediate)
OFF (No fixed iris) 1 (Low)
3 (High) 2 (Intermediate)
OFF (No automatic correction) 1 (Low)
3 (High) 2 (Intermediate)
OFF (No automatic correction) 1 (Low)