Panasonic PT-D10000U - Manual (Page 52)

52 – ENGLISH
8. Press ◄► to adjust the level.
Note
All colors will not be displayed properly unless
adequate adjustment is made. If the adjustment
does not look suitable, you can press DEFAULT to
return the setting for the selected item only to the
factory default setting.
The color temperature cannot be adjusted for the
internal test pattern (p. 83). Be sure to project the
input signal when adjusting the color temperature.
Gamma setting
This switches the gamma mode.
1. Press ▲▼ to select “GAMMA”.
•
•
Item Operation Adjustment
Adjustment
range
R
Press ► button.
Deepens
red.
Maximum
value
HIGH : 255
LOW : 127
Minimum value
HIGH : 0
LOW : -127
Default
HIGH : 255
LOW : 0
Press ◄ button.
Weakens
red.
G
Press ► button.
Deepens
green.
Press ◄ button.
Weakens
green.
B
Press ► button.
Deepens
blue.
Press ◄ button.
Weakens
blue.
Item Operation Adjustment
Adjustment
range
R
Press ► button.
Deepens
red.
Maximum
value
HIGH : 255
LOW : 127
Minimum value
HIGH : 0
LOW : -127
Default
HIGH : 255
LOW : 0
Press ◄ button.
Weakens
red.
G
Press ► button.
Deepens
green.
Press ◄ button.
Weakens
green.
B
Press ► button.
Deepens
blue.
Press ◄ button.
Weakens
blue.
PICTURE
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
COLOR TEMP.
GAMMA
SHARPNESS
NOISE REDUCTION
DYNAMIC IRIS
SYSTEM SELECTOR
MENU SELECT
CHANGE
NATURAL
0
0
10
1
DEFAULT
DEFAULT
0
OFF
OFF
AUTO 1
PICTURE
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
COLOR TEMP.
GAMMA
SHARPNESS
NOISE REDUCTION
DYNAMIC IRIS
SYSTEM SELECTOR
MENU SELECT
CHANGE
NATURAL
0
0
10
1
DEFAULT
DEFAULT
0
OFF
OFF
AUTO 1
2. Press ◄► to switch “GAMMA”.
The setting will change as follows each time
◄► is pressed.
Note
Separate software is required to select “USER1”
and “USER2”. Consult your dealer.
“DEFAULT” cannot be selected when the picture
mode has been set to “USER”.
Sharpness setting
This adjusts the sharpness of the pictures.
1. Press ▲▼ to select
“SHARPNESS”.
2. Press ◄► to adjust the level.
Note
The possible setting range will vary depending on
the input signal.
•
•
•
•
DEFAULT USER1 USER2
2.5 2.2
DEFAULT USER1 USER2
2.5 2.2
PICTURE
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
COLOR TEMP.
GAMMA
SHARPNESS
NOISE REDUCTION
DYNAMIC IRIS
SYSTEM SELECTOR
MENU SELECT
CHANGE
NATURAL
0
0
10
1
DEFAULT
DEFAULT
0
OFF
OFF
AUTO 1
PICTURE
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
COLOR TEMP.
GAMMA
SHARPNESS
NOISE REDUCTION
DYNAMIC IRIS
SYSTEM SELECTOR
MENU SELECT
CHANGE
NATURAL
0
0
10
1
DEFAULT
DEFAULT
0
OFF
OFF
AUTO 1
Operation Adjustment Adjustment range
Press ►
button. Contours become
sharper.
0 to 15
Press ◄
button. Contours become
softer.
Operation Adjustment Adjustment range
Press ►
button. Contours become
sharper.
0 to 15
Press ◄
button. Contours become
softer.
Adjusting the picture (continued)