Disc operations – Philips LX7100SA/22 User Manual

Page 22

Advertising
background image

22

English

3139 115 22741

Disc Operations

IMPORTANT!
– DVD discs and players are designed
with regional restrictions. Before
playing a disc, make sure the disc is
for the same zone as your player.
– Depending on the DVD or VIDEO
CD, some operations may be
different or restricted.
– Do not push on the disc tray or
put any objects other than discs on
the disc tray. Doing so may cause
the disc player to malfunction.

Playable discs

Your DVD home cinema system will
play:
– Digital Video Discs (DVDs)
– Video CDs (VCDs)
– Super Video CDs (SVCDs)
– Super Audio CDs (SACDs)
– Digital Video Discs + Rewritable

(DVD+RW)

– Compact Discs (CDs)
– MP3 discs

– Maximum 30 characters display.
– Supported sampling frequencies :

32 kHz, 44.1 kHz, 48 kHz

– Supported Bit-rates : 32~256 (kbps),

variable bit rates

SUPER VIDEO

Region Codes
DVDs must be labelled for ALL
regions or for Region 2 in order
to play on this DVD system. You
cannot play discs that are labelled
for other regions.

Helpful Hints:
– It may not be possible to play CD-R/RW or
DVD-R/RW in all cases due to the type of
disc or condition of the recording.
– If you are having trouble playing a certain
disc, remove the disc and try a different one.
Improperly formatted discs will not play on
this DVD system.

IMPORTANT!
If the inhibit icon (

X

) appears on

the TV screen when a button is
pressed, it means the function is not
available on the current disc or at
the current time.

Playing discs

1

Press SOURCE button until “

DISC”

appears on the display panel (or press
DISC on the remote).

2

Turn on the TV power and set to the
correct Video In channel. (See page 19
“Setting the TV”).

You should see the blue Philips DVD

background screen on the TV.

3

Press the OPEN/CLOSE / button to
open the disc tray and load a disc, then
press the button again to close the disc
tray.

Make sure the disc label is facing up.

For double-sided discs, load the side you
want to play face up.

4

Playback will start automatically. If not,
press 2;.

For SACDs, VCDs and CDs, playback

will stop at the end of the disc.

If a disc menu shows on the TV, see

next page on “Using the Disc Menu”.

If the disc is locked by parental control,

you must enter your four-digit password
(see page 34).

Helpful Hint:
– Some CD, SACD or MP3-CD may contain
text information (for example, track name,
album name, artist name, etc.), which will
appear on the TV screen during playback.

ALL

2

001-045-LX71-22-Eng1

7/9/03, 2:00 PM

22

Advertising