Tuner operations – Philips LX7100SA/22 User Manual

Page 37

Advertising
background image

37

English

3139 115 22741

IMPORTANT!
Make sure the FM and MW
antennas are connected.

Tuning to radio stations

1

Press

TUNER on the remote (or press

SOURCE button on front panel) to
select FM or MW band.

2

Press and hold S / T until the
frequency indication starts to change,
then release.

The next radio station will tune

automatically.

3

To tune a weak station, press S / T
briefly and repeatedly until an optimal
reception is found.

Presetting radio stations

You can store up to 40 preset radio
stations in the memory, starting from FM
and followed by MW bands.

Helpful Hints:
– The system will exit presetting mode if no
button is pressed within 20 seconds.
– If no stereo frequency is detected during
Plug and Play, "

CHECK ANTENNA"

appears.

Using the Plug and Play

Plug and Play allows you to store all
available radio stations automatically.

1

Connect the system to the power supply,
"

AUTO INSTALL - PRESS PLAY"

appears.

OR

In standby mode, press and hold 2;

on

the top panel until "

AUTO INSTALL -

PRESS PLAY" appears.

2

Press 2;

on the top panel to start

installation.

"

INSTALL TUNER" appears.

All previously stored radio stations will

be replaced.

Once completed, the last tuned radio

station (or the first available RDS station)
will be played.

3

If the first preset is a RDS station, it will
proceed to set the RDS clock.

"

INSTALL" is displayed, followed by

"

TIME" and "SEARCH RDS TIME".

When RDS time is read, "

RDS TIME"

is displayed and the current time will be
stored.

If RDS station does not transmit RDS

time within 90 seconds, “

NO RDS TIME”

is displayed and the programme will exit
automatically.

Automatic presetting

You can start the automatic presetting
from a selected preset number.

1

Press

TUNER on the remote (or press

SOURCE button on front panel) to
select FM or MW band.

2

Press 1 2 or use the

numeric keypad

(0-9) to select a preset number to begin.

3

Press and hold

PROG until "

AUTO

PROGRAM" appears.

If a radio station is stored in one of the

presets, the same radio station will not
store under another preset number.

If no preset number is selected,

automatic preset will begin from preset
(1) and all your former presets will be
overridden.

Tuner Operations

001-045-LX71-22-Eng

8/07/2003, 11:27 AM

37

Advertising