Philips LX7100SA/22 - Manual (Page 38)

38
English
3139 115 22741
Tuner Operations Timer Operations
Manual presetting
You can choose to store only your
favourite radio stations.
1
Tune to your desired radio station (refer
to “Tuning to radio stations”).
2
Press PROG twice.
➜ The preset number starts flashing. If
you want to store the radio station in
another preset number, press 1 2 or use
the
numeric keypad (0-9).
3
Press PROG again to store.
4
Repeat steps
1
–
3
to store other radio
stations.
Selecting a preset radio
station
● Press 1 2 or use the numeric keypad
(0-9) to select a preset number.
➜ The preset number, radio frequency,
and waveband will appear.
Deleting a preset radio station
● Press and hold 9 on the top panel until
“
PRESET DELETED” appears.
➜ The current preset radio station will
be deleted and the next available preset
radio station will take its place.
➜ All other preset radio stations with
higher numbers will decrease by one.
Setting the timer
The system can switch on to DISC or
TUNER mode automatically at a preset
time, serving as an alarm to wake you up.
IMPORTANT!
– When in Eco Power standby
mode, it is not possible to show the
clock time or set the clock/timer
function.
– Before setting the timer, ensure
that the clock is set correctly.
– The volume of the timer will
increase gradually to the last tuned
volume level. If the last tuned
volume level is too low, the set will
then increase to a predetermined
minimum audible level.
CLOCK/TIMER
2
3
4
5
SEARCH/PREV
SEARCH/PREV
CLOCK/TIMER
1 STANDBY•ON
ECO POWER
SOURCE
12 : 00AM
TUNER
10:38AM
DISC
12:00AM
DISC
10:38AM
DISC
1
Press STANDBY ON to switch on the
DVD system.
2
Press and hold CLOCK/TIMER until
the clock time starts flashing on the
display panel.
3
Press SOURCE repeatedly (or
DISC or TUNER on the remote) to
select the wake up source (DISC or
TUNER).
buttons on
top/front panel DVD system’s
display panel
001-045-LX71-22-Eng 8/07/2003, 11:27 AM 38