Philips LX7100SA/22 - Manual (Page 40)

40
English
3139 115 22741
Sound Control
IMPORTANT!
For proper surround sound, make
sure the speakers and subwoofer are
connected (see page 10).
Selecting surround sound
● Press SURROUND to select :
MULTI-CHANNEL, 3D SOUND or
STEREO.
➜ The availability of the various surround
sound modes depends on the number of
speakers used and the sound available on
the disc.
➜ The centre and surround speakers
operate only when the DVD home
cinema system is set to Multi-channel
mode.
➜ The available output modes for Multi-
channel include: Dolby Digital, DTS
(Digital Theatre Systems) Surround, Dolby
Pro Logic and Matrix.
➜ Stereo broadcasts or recordings will
produce some surround channel effects
when played in a surround mode.
However, mono (single channel sound)
sources will not produce any sound from
the surround speakers.
● When playing SACD, press
SURROUND to select SACD multi
channel or SACD stereo.
Turning on/off clear voice effect
You can enhance the centre and surround
sound outputs by activating the clear
voice sound feature if you have selected
Multi-channel as the surround mode.
● Press VOICE on the remote to select
“
CLEAR VOICE ON”.
➜ To turn off the setting, press VOICE
again to select “
CLEAR VOICE OFF”.
Selecting digital sound effects
Select a preset digital sound effects that
matches your disc’s content or that
optimises the sound of the musical style
you are playing.
● Press SOUND on the remote.
When playing movie discs, you can select :
CONCERT, DRAMA, ACTION or SCI-FI.
When playing music discs or while in
TUNER or AUX/DI mode, you can select :
ROCK, DIGITAL, CLASSIC or JAZZ.
Helpful Hint:
– For flat sound output, select CONCERT or
CLASSIC.
Volume control
● Adjust VOLUME control (or press
VOL +/-on the remote) to increase
or decrease the volume level.
➜ "
MIN VOL" is the minimum volume
level and “
MAX VOL” is the maximum
volume level.
To listen through the headphones
● Connect the headphones by plugging into
the n socket at the front of the DVD
system.
➜ The speakers will be muted.
To turn off the volume temporarily
● Press MUTE on the remote.
➜ Playback will continue without sound
and "
MUTE" appears.
➜ To restore the volume, press MUTE
again or increase the volume level.
Sound and Volume Controls
001-045-LX71-22-Eng 8/07/2003, 11:27 AM 40