Installing batteries – Nikon SB-80DX User Manual

Page 16

Advertising
background image

16

l

Usable batteries

m Install four AA-type penlight batteries (1.5V or lower) of any of these types:

(1) Alkaline-manganese (1.5V)

(2) Lithium (1.5V)

(3) NiCd (rechargeable, 1.2V)

(4) Ni-MH (Nickel Metal Hydride) (rechargeable, 1.2V)

n When replacing batteries, use fresh batteries of the same brand.
n High-power manganese batteries are not recommended for use

with the SB-80DX.

n Always carry extra batteries when traveling.
n Refer to “Notes on batteries” on page 96.

CAUTION!

n Do not use batteries not specified in this instruction manual, as this may

cause them to explode, leak corrosive liquids, or catch on fire.

n Do not mix battery brands or types, or use old with new batteries. Otherwise

the batteries may explode, leak corrosive liquids, or catch on fire.

n Do not recharge non-rechargeable batteries in a battery charger.

Otherwise the batteries may leak corrosive liquids, or generate heat.

1

Installing batteries

1

Open the battery chamber lid as indicated
by the arrows.

2

Install the batteries following the

i

and

j

marks as shown. Then close the

battery chamber lid by sliding it into place
while pressing down.

Advertising