Nikon SB-80DX - Manual (Page 79)

79
Technical
operation/Effective
S
peedlight
placement
l
Manual multiple flash
1 Set the camera’s exposure mode to Aperture-
Priority Auto (A) or Manual (M).
2 Turn off the power and attach the master flash
unit to the camera.
3 Connect the sync terminal on the master flash
unit to the slave flash unit using optional Sync
Cords SC-11 or SC-15.
4 Turn on the power of all flash units and set the
flash mode on all units to Manual flash.
nThe flash output level can be adjusted on the SB-80DX,
SB-28, etc., if necessary (p. 45).
nFP High-Speed Flash sync and Repeating flash are
not possible.
5 Confirm the aperture and flash shooting distance
as in normal Manual flash shooting, then shoot.
nSee page 46 about the Manual flash mode.