Nikon SB-80DX - Manual (Page 84)

84
m When the SB-80DX is attached to the camera after activating the Wireless
flash mode, the O indicator appears on the LCD panel, showing that the
SB-80DX can be used as a wireless master flash unit. When the flash unit is
detached as it is, the indicator automatically changes to P or P and you
can use the SB-80DX as a wireless slave flash unit.
m With the SB-80DX attached to Digital SLRs cameras, the wireless flash mode is
canceled and no wireless flash indicator appears on the LCD panel when the
flash mode is set to D-TTL auto flash. Therefore, be sure to set the flash mode to
other than D-TTL auto flash.
1 Press the
g
button for more than 2 sec. to
display the Custom settings mode.
2
Press the
e
or
f
button to choose the
“Wireless flash mode.”
3
Press the
c
or
d
button to select “ON.”
4 Press the
g
button for more than 2 sec. or
press the
b
button to return to the normal
setting mode.
5 Detach the SB-80DX from the camera.
6 Press the
a
button until the wireless flash
indicator appears on the LCD panel.
P
(Auto mode)
⇔ P
(Manual mode)
l
Activating and canceling the wireless flash mode using
Custom settings
Wireless multiple flash shooting
A M
A M