NetComm NB1300PLUS4 - Manual (Page 53)

Rev. 1 - YML674 www.netcomm.com.au
NB1300Plus4 ADSL Modem Page 53
Advanced
ADSL Configuration
The ADSL Configuration page allows the user to set the configuration for ADSL protocols.
Trellis: This field allows the user to enable or disable the Trellis Code. By default, it is
always enabled.
Handshake Protocol: This field allows the user to select the ADSL handshake protocol.
Wiring Selection: This field allows the user to enter the wiring selection for the RJ-11.
Tip/Rip is the default for the board without the inner/outer pair relay
Bit Swapping: This field allows the user to enable or disable the upstream bit swapping.