NetComm NB1300PLUS4 - Manual (Page 54)

www.netcomm.com.au Rev. 1- YML674
Page 54 NB1300Plus4 ADSL Modem
Advanced
RIP Configuration
The RIP Per Interface Configuration page allows the user to set the configuration for each
Interface (PVCs, PPP Sessions, USB and LAN).
Interface: This field allows the user to choose the Interface (PVCs, PPP Sessions, USB and
LAN), for the RIP to be configured.
Enable: This field allows the user to Enable (Yes) or Disable (No) the specified interface for
RIP.
Supplier: This field allows the user to select the Supplier Mode (RIP Transmit).
❏ Disabled: The supplier transmit is disabled.
❏ V1 BC: The supplier transmits in RIPv1 Broadcast.
❏ V2 BC: The supplier transmits in RIPv2 Broadcast.
❏ V2 MC: The supplier transmits in RIPv2 Multicast.
Listener: This field allows the user to select the Listener Mode (RIP Receive)
❏ V1: The listener receives the RIPv1 only.
❏ V2: The listener receives the RIPv2 only.
❏
V1+V2: This listener receives the both RIPv1 and RIPv2.
Supplier and Listener are based on section 4.1 "Compatibility Switch" in RFC 1723.
Current RIP Settings: This field displays the each interface's RIP status.