Enabling wpa authentication and security – NetComm NB6W User Manual
Page 148
Advertising
NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn
User Guide
YML854Rev1
148
www.netcomm.com.au
Enabling WPA Authentication and Security
The first four steps are the same as the setting for 802.1x authentication, please refer to the previous part.
5.
Select the
Association Tab, and enter the SSID of the AP. (e.g., Please)
6.
Choose WPA from the drop down menu for the
Network Authentication, and TKIP for Data encryption.
7.
Click
OK, and then select the Authentication Tab.
Advertising