NetComm NB6W User Manual
Page 94
Advertising
NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn
User Guide
YML854Rev1
4
www.netcomm.com.au
Here provides an example shown in the right column. Select TCP as the
Protocol type, and make the Source
and Destination IP address to include All, then type 0 and 65535 as the start and end port.
A new IP filtering setting for Outbound traffic is created in the web page. To edit the setting, please click
to
get into the editing page. To delete the setting, click
to erase it. To set another IP filtering, click
Add again.
To add a new Inbound IP Filtering, click
Inbound traffic in the item of Select the direction to filter packets on
the
IP Filtering page. Use the same way to add a new one as stated above.
Advertising