Renewing ip address on client pc – NetComm NB6W User Manual
Page 34
NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn
User Guide
YML854Rev1
4
www.netcomm.com.au
Renewing IP Address on Client PC
After the ADSL Router gets on line, there is a chance that your PC does not renew its IP address and thus
causes the PC not able to access the Internet. To solve this problem, please follow the procedures below to
renew PC’s IP address.
For Windows 98/mE
1.
Select Run from the Start menu.
2.
Type winipcfg in the text box and click OK.
3.
When the figure below appears, click Release to let go of the address and then click the Renew button to
obtain a new IP address.
For Windows NT/2000/XP/vista
1.
Open the Start menu, and click Run.
2.
Type cmd in the text box that appears and click OK. You will then see the command prompt window.
(Windows Vista) Click Start and type ‘cmd’ in the text bar and press Enter.
(alternative method for opening the command prompt)
•
From Start menu, point to Programs, select Accessories, and then click Command Prompt.
3.
Type ipconfig at the command prompt window and press Enter to view the computer’s IP information
from DHCP server.
4.
If the computer is holding a current IP address, type ipconfig /release to let go of the address, then type
ipconfig /renew to obtain a new one.