Nortel Networks Companion MICS-XC - Manual (Page 31)

Installation / 25
P0881594 Issue 01 MICS-XC Norstar-Companion Installer Guide
Maximum power cabling distance (approximate)
Depending on the size of cable you are using, you should
remember the maximum cabling distances allowed between
the RPI and the Base Station.
RPI Connector Overview
The following illustration shows where the input and output
connectors are located on the RPI connector board.
RPI connector board
Wire size Single-pair Double-pair
0.6 mm (22 AWG) 450 m (1,500 ft.) 900 m (3,000 ft.)
0.5 mm (24 AWG) 300 m (1,000 ft.) 600 m (2,000 ft.)
When using two power pairs, ensure they are
connected with the same polarity.
OBIX1 OBIX2 OBIX3 OBIX4 OBIX9 OBIX10 OBIX11 OBIX12
OBIX5 OBIX6 OBIX7 OBIX8 OBIX13 OBIX14 OBIX15 OBIX16
IBIX1
IBIX3
IBIX2
IBIX4
p0881594.book Page 25 Tuesday, August 25, 1998 3:59 PM