Programming tools, A norstar telephone, The programming overlay – Nortel Networks Companion MICS-XC User Manual
Page 56: Programming tools 50, A norstar telephone 50 the programming overlay 50, Programming, Overlay is provided at the front of this guide
50 / Programming
MICS-XC Norstar-Companion Installer Guide
P0881594 Issue 01
Programming overview of XC using the System Coordinator
password
Programming tools
A Norstar telephone
Programming is done at an M7310 or M7324 telephone. Use
the buttons on the telephone to program a setting or to request
a specific programming action. Norstar guides you with step-
by-step instructions on the telephone display while you are
programming.
The programming overlay
The
programming overlay is a paper cutout that labels four
telephone buttons used during programming. The
programming
overlay is provided at the front of this guide.
Terminals&Sets
Lines
Passwords
Capabilities
Name
Call log pswds
Name
Services
Progrming pswds
User prefernces
Ringing service
Reg. pswd
Restrictions
Restrn service
Time&Date
Telco features
Routing service
System prgrming
Sys speed dial
Companion
p0881594.book Page 50 Tuesday, August 25, 1998 3:59 PM