Nortel Networks Companion MICS-XC - Manual (Page 80)

74 / Registering individual portables
MICS-XC Norstar-Companion Installer Guide P0881594 Issue 01
4. Press the ADD key to establish a radio link. The portable
displays Adding SYSTEM:# for two seconds, then it
displays Pswd:.
If a radio link is not established, the portable displays
No connection. Close the flap, and repeat the procedure
from step 1.
5. Enter the Registration password. The default is
¶™£¢§ (RADIO). The portable displays DN:.
If the registration password is not correct, the portable
displays InvldPswd. Close the flap and repeat the
procedure from step 1.
6. Enter the DN (between 637 and 666). The portable
displays Enter name.
If the DN is incorrect, the portable displays Invld DN. If
the registration fails, the portable displays Reg failed.
If you try to register the C3050 to the same system twice,
the portable displays the registered name, for example
Registered as NORTEL 1.
7. Enter the system name (up to 16 characters), for example
NORTEL 1. (If you are registering to only one system, use
the portable telephone user’s name.)
Press the key that has the letter. For example, to enter A,
press
™, to enter B, press ™™.
Press SPACE to add a blank space to the name.
Press BKSP to remove a mistake.
Press
¯or ˘to move the cursor backward or forward.
8. Press SAVE. The portable displays the registered name, for
example NORTEL 1 registered.
9. Turn off registration for your system.
p0881594.book Page 74 Tuesday, August 25, 1998 3:59 PM