NETGEAR WPNT834 User Manual
Page 52
Reference Manual for the RangeMax 240 Wireless Router WPNT834
4-14
Wireless Configuration
v1.0, November 2005
5. Click Add to add a wireless device to the wireless access control list. The Wireless Card
Access Setup dialog displays.
6. In the Available Wireless Cards list, either select from the list of available wireless cards the
WPNT834 has found in your area, or enter the MAC address and device name for a device you
plan to use. You can usually find the MAC address printed on the wireless adapter.
7. Click Add to add this wireless device to the Wireless Card Access List. The screen changes
back to the list screen.
8. Repeat
for each additional device you wish to add to the list.
9. Be sure to click Apply to save your Wireless Card Access List settings.
Now, only devices on this list are allowed to wirelessly connect to the WPNT834.
Figure 4-8
Note: You can copy and paste the MAC addresses from the firewall’s Attached
Devices menu into the MAC Address box of this menu. To do this, configure
each wireless computer to obtain a wireless link to the firewall. The computer
should then appear in the Attached Devices menu.