Lights never turn off, Lan or wan port lights not on, Lights never turn off -2 – NETGEAR WPNT834 User Manual

Page 73: Lan or wan port lights not on -2

Advertising
background image

Reference Manual for the RangeMax 240 Wireless Router WPNT834

7-2

Troubleshooting

v1.0, November 2005

Lights Never Turn Off

When the router is turned on, the lights turns on for about 10 seconds and then turn off. If all the
lights stay on, there is a fault within the router.

If all lights are still on one minute after power up:

Cycle the power to see if the router recovers.

Clear the router’s configuration to factory defaults. This sets the router’s IP address to
192.168.1.1. The procedure is explained in

“Restoring the Default Configuration and

Password” on page 7-7

.

If the error persists, you might have a hardware problem and should contact technical support.

LAN or WAN Port Lights Not On

If either the LAN lights or Internet light do not light when the Ethernet connection is made, check
the following:

Make sure that the Ethernet cable connections are secure at the router and at the hub or
workstation.

Make sure that power is turned on to the connected hub or workstation.

Be sure you are using the correct cable:

— When connecting the router’s Internet port to a cable or DSL modem, use the cable that

was supplied with the cable or DSL modem. This cable could be a standard straight-
through Ethernet cable or an Ethernet crossover cable.

Advertising